Front wing Triumph Street Triple 765 (24-26)

These Origin Vision Tech aerodynamic wings are designed and developed with CFD (Computational Fluid Dynamics) simulations to ensure maximum efficiency and stability at high speeds. We're talking about approximately 1kg at 230km/h!
Unlike currently available versions, which are only secured with double-sided tape, our wings are easily installed using the two screws already present under the headlight, offering a secure and plug & play mounting, without any modifications to the motorcycle.

Design registered with EUIPO © 2026 Origin Vision Tech — All rights reserved

• Downforce developed: 12.6kg - data measured at 230 km/h (as per specifications provided)
• Dimensions and footprint: as per technical data provided
• Material: 3D printed in high-strength and precision ABS
• Reduction of turbulence at the front
• Improved efficiency and front-end grip
• Increased braking force during hard braking
• Plug & play mounting, no fairing drilling required
• CFD aerodynamic tests performed
• Breakage resistance tests carried out
• Italian production, with maximum attention to detail and functionality
• Exclusive track use

• 1 aerodynamic front wing
• 3M VHB double-sided adhesive already applied where specified
• Complete fastening kit: screws, washers and nuts (if necessary)
• Origin sticker already applied
• User, maintenance and liability manual

• The installation of aerodynamic appendages may alter the overall dimensions of the motorcycle.
• Check fork travel, absence of interference, and correct functioning of brakes and suspension.
• In case of interference, adjust the suspension or modify the mounting.
• Installation and checks must be performed by qualified personnel.
• Origin Vision Tech is not responsible for damages resulting from incorrect assembly or missed checks.
• The products are intended exclusively for track use and are not homologated for public roads.
• The user is responsible for complying with the regulations in force in their country.
  
  Important:
  Returns or refunds will not be accepted for aesthetic characteristics typical of 3D printing (such as layer lines, irregularities, or uneven texture) on items sold as raw and unfinished. Such characteristics do not constitute a defect. By making a purchase, the customer declares to have read and accepted the aesthetic characteristics of the product.